|
|
Testing procedure is based on real life
conditions.
(Comparative extension of stand-by time durations). |
|
|
Testing optimum effectiveness of BatMax must start with rechargeable
batteries that have at least 3 to 6 months of use. BatMax cannot
extend the battery life of a brand new battery. |
|
|
Battery life and charging speed improvements are noticeable
after several cycles (7-10).
Measure the extension of time and / or remaining voltage after
each cycle. |
|
Keep the battery installed inside the mobile phone during the
test.
Tests and measurements with a removed battery will generate
lower results. |
|
Follow
the installation manual and procedures. If
the product is not installed as suggested, the product will
generate no effect. BatMax foil
must cover 60-80% of the battery's footprint.
|
